Banner Care & Handling Tips
VINYL BANNERS
1. Always roll your banner with the design to the inside. Make sure the banner is completely dry before you roll it up. Do not store it when wet or damp.
2. NEVER FOLD THE BANNER!
3. Never use a rubber band to secure the banner roll as this will casue creases.
4. Loosely roll onto a rigid core or tube of some kind to ensure that it does not kink, crease or smash. 5
5. Store in a cool, dry location.
6. Clean with a soft, damp rag if dirty.
7. Do not use harsh substances like chemical cleansers or scrubber sponges on banner.
8. Keep the banner away from solvents such as paint thinner, acetone, alcohol, gasoline, etc.
9. Do not allow the banner to have ink to ink contact with itself or any other type of print or paint.
|
FABRIC BANNERS 1. Always roll your banner with the design to the inside. Do not store it wet or damp. 2. NEVER FOLD THE BANNER! 3. Never use a rubber band to secure the banner roll as this will casue creases. 4. Loosely roll onto a rigid core or tube of some kind to ensure that it does not kink, crease or smash. 5. Do not use harsh substances like chemical cleansers or scrubber sponges on banner. 6. Keep the banner away from solvents such as paint thinner, acetone, alcohol, gasoline, etc. 7. Do not allow the banner to have ink to ink contact with itself or any other type of print or paint.
|
 |
|
CUSTOM TABLE THROW FABRIC CARE 1. If your exhibit fabric has a zipper, please keep zipper closed for storage. 2. Wrinkles can be removed with cool iron or fabric steamer. 3. Fabric should NOT be stored when damp or wet. Store in cool, dry area. 4. For storing graphics please remove from plastic packaging that was provided and keep fabric in cool/dry place.
Washing 1. Your fabric graphic can be machine washed. Remove any hardware attached to the fabric prior to cleaning. Use MILD soap and cool water. Air dry fabric, dry on frame if frame is available. 2. Fabric must be COMPLETELY dry prior to storing. 3. DO NOT DRY CLEAN
Stain Treatment 1. Treat stain from backside of fabric. 2. Remove as much of debris as possible with a soft bristle brush (do NOT rub too hard) 3. Use a clean, lint-free white cloth. Lightly pat the stain from the outside moving in (to keep stain from spreading) 4. If a cleaning solution is used, rinse the area well with water to ensure NO solution is left on fabric. 5. Most stains can be treated with household fabric stain removers. It is ALWAYS important to test how the solution will react to the fabric. This can be tested by dabbing solution to a small corner of the fabric. Most household cleaners will provide treatment instructions depending on the type of stain.
|
 |
|
STOCK TABLE THROW FABRIC CARE Product meets National Fire Product Association (NFPA) standard 701 for Flame Resistance. 1. Wrinkles can be removed with cool iron or fabric steamer. 2. For storing graphics please remove from plastic packaging that was provided and keep fabric in cool/dry place. Fabric should NOT be stored when damp or wet. 3. Do NOT iron directly on printed sections of fabric.
Washing 1. Your fabric graphic can be machine washed. Use MILD soap and cool water. Tumble dry medium low - medium heat. 2. Fabric must be COMPLETELY dry prior to storing. 3. DO NOT DRY CLEAN
Stain Treatment 1. Treat stain from backside of fabric. 2. Remove as much of debris as possible with a soft bristle brush (do NOT rub too hard) 3. Use a clean, lint-free white cloth. Lightly pat the stain from the outside moving in (to keep stain from spreading) 4. If a cleaning solution is used, rinse the area well with water to ensure NO solution is left on fabric. 5. Most stains can be treated with household fabric stain removers. It is ALWAYS important to test how the solution will react to the fabric. This can be tested by dabbing solution to a small corner of the fabric. Most household cleaners will provide treatment instructions depending on the type of stain.
|
 |